globalSAN installation failed

On a small number of systems, OS X has reported that there were errors with the installation, even though it is a signed application.

We've found that temporarily disabling the Systems Integrity Protection (SIP) will allow globalSAN to install correctly when this happens.

To disable SIP:

• Reboot the system and hold down the Command and R (⌘+R) keys simultaneously after you hear the startup chime; this will boot OS X into Recovery Mode.

• Once in Recovery Mode, open a Terminal window and run this command:

csrutil disable

• You’ll see a message saying that System Integrity Protection has been disabled and the Mac needs to restart for changes to take effect.

• Reboot the machine.

• When the System boots back up, install the current version of globalSAN.

• You will be prompted for a reboot, and can re-enable SIP at the same time.

To re-enable SIP:

• Boot into Recovery Mode the same as before (hold down the Command and R (⌘+R) keys simultaneously after you hear the startup chime).

• Open a Terminal window and run this command:

csrutil enable

• Reboot the machine as normal.